1. DVB-Technique / Technik
(Forum)

Parabolantennen, LNC, LNB, Diseqc, SMATV etc.

2. Re:tevii S464 expresscard faulty ?
(Forum/S420/S460/S470)

...t's a "signal only". You can only test it by opening channels in Highband - usually it often happens with DiseqC switches. Cheap ones often don't understand "one DiseqC command" send by the card. Appl...

3. Re:New S2-3650 not working with dish setup
(Forum/TT-Connect S/S2/C/T)

...ne in the "common way", DVBVIEWER uses. DVBVIEWER will finally work, I have the same setup here (S2-3650, DiseqC 2/1, DVBVIEWER, Windows 7 with Vistadrivers installed)...

4. Re:New S2-3650 not working with dish setup
(Forum/TT-Connect S/S2/C/T)

I have replaced the diseqc and cables and the setup currently works, a bit unstable, but it works :D Now rests the problem that my CryptoWorks (By Smit) is not detected with all sorts of dll, drive

5. Re:New S2-3650 not working with dish setup
(Forum/TT-Connect S/S2/C/T)

...B etc.), which is sending 13/18V to the LNB and back to the Box. This can cause a malfunction with the DiseqC-Switch, too....

6. New S2-3650 not working with dish setup
(Forum/TT-Connect S/S2/C/T)

...cause my PC has died and I now use a laptop for the time being. Unfortunately the same setup I used (4/1 diseqc with 42 and 7E) does not work currently. I'm on Win7 with the latest drivers (1.0.4.5)...

7. Re:Te Vii S464 S2 kein Sat 1 Pro7 oder RTL
(Forum/S420/S460/S470)

...w.progdvb.com - das MyTevii Zeugs ist manchmal wirklich "bescheiden" zum konfigurieren, gerade wenn es um DiseqC geht usw. Dort dann einfach mal einen Suchlauf MANUELL auf dem Transponder machen, i...

8. Re:Can\'t get SaTiX-S2 Dual to work with windows 7
(Forum/SaTiX-S2 Dual)

When I scan with Transedit there are no canals found. I tried all the diseqc settings

9. Tevii DVB-S2 PCI compatibile con il diseqc 1.1
(Forum/DVB-S)

Hello I needed a technical information Which satellite card Tevii DVB-S2 PCI is compatible with diseqc 1.1 ? The S464 or the S470 ? On the site I read that the 470 is not compatible: http://www

10. Re:faulty CI or CAM
(Forum/SaTiX-S2 Dual)

... "hardware detect", it should list the Mystique SaTiX Dual Device. I've come a little further now, but diseqc didn't work and CI option was accesable some time, but nothing was displayed and nothin...

11. Can\'t get SaTiX-S2 Dual to work with windows 7
(Forum/SaTiX-S2 Dual)

...from this forum. When I try to configure the card in windows mediacenter I put the astra 1 (19,2E) on diseqc 1 and the astra 3 (23,5E) on diseqc 2. I only get a signal from the astra 1 (19,2E) ...

12. S464 - DiseqC under Window 7 Media Center
(Forum/S420/S460/S470)

...atellite configuration run. There are to LNB's connected via a multiswith supporting the 2 satellites: DiSEqC-Position 1 = Astra 1E, 1F, 1G 1H (19,2 Ost) DiSEqC-Position 2 = Hotbird 6, 7A,8 (13,0 ...

13. Re:Windows 7 BETA Driver Connect incl. CI f. MCE
(Forum/TT-Connect S/S2/C/T)

...nicht mehr allzu lange dauert. Eine andere Frage mal zur Abwechslung: Unterstützt der Treiber eigentlich DiSEqC unter WMC7? Bin nämlich am überlegen, meine Sat Anlage neben Astra auf Eutelsat aufzurü...

14. Linux & Mystique SaTiX-S2 V2 CI Dual
(Forum/SaTiX-S2 Dual)

Hi, is "Mystique SaTiX-S2 V2 CI Dual" supported (booth tuner,DiSEqC...) into linux ? thanks

15. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

I used the beta drivers from this forum but they did not fix the Diseqc switch problems. I bought several switches and they all fail with S2-1600 (no problems on Hmax, dreambox and Skystar2). No

16. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

Any News yet when the Driver will be available? Mailed TT-Görler Support a few weeks ago and they said that it will take a few more weeks. I`m so sick of waiting. I use the TT S2-1600 with a EM

17. Re:Mystique SaTiX-S2 V2 CI Dual Diseqc 1.2 Support
(Forum/SaTiX-S2 Dual)

...t too but I have some picture problems with some HD channels besides the current DVBLink does not support Diseqc 1.2 yet. There is a patch for that to enable sending raw diseqc commands. I haven't tri...

18. Re:Mystique SaTiX-S2 V2 CI Dual Diseqc 1.2 Support
(Forum/SaTiX-S2 Dual)

Do you already have the CI module? I am asking because you write that you use DVB Viewer Pro 4.3 Beta. Does the CI module work with that version? I can't wait to get my CI module. I make my deci

19. Re:Mystique SaTiX-S2 V2 CI Dual Diseqc 1.2 Support
(Forum/SaTiX-S2 Dual)

...d with the picture quality and windows 7 and mce support. I just cant wait for a new driver that supports diseqc 1.2 in windows 7 Media Center. I would recommend this device any time. (I mean for now ...

20. Mystique SaTiX-S2 V2 CI Dual Diseqc 1.2 Support
(Forum/SaTiX-S2 Dual)

I purchased the Mystique SaTiX-S2 V2 CI Dual, ignorantly thinking that because it supports Diseqc 2.0 it should be able to handle 1.1/1.2 Positioning as well. After I recieved and tested it, I found o

21. Re:Add: Neue S470 hat kein Signal
(Forum/S420/S460/S470)

....6.0 (20100225) Realtek Soundtreiber. 6.0.1.6083 Vista 32 C2Duo 8500 an Technisat Gigaswitch 11/8G (Diseqc) Danke! Welche Software benutzt du? Hast Du die Karte auch mal in einem anderen P...

22. Add: Neue S470 hat kein Signal
(Forum/S420/S460/S470)

....6.0 (20100225) Realtek Soundtreiber. 6.0.1.6083 Vista 32 C2Duo 8500 an Technisat Gigaswitch 11/8G (Diseqc) Danke!...

23. [SOLVED] SaTiX-S2 Dual V2 - no signal
(Forum/SaTiX-S2 Dual)

...l found. I've tried switching cables.. no signal. Then I tried a direct connection to a lnb, skipping the diseqc switch. Yes! First time was a succes. But.. after a reboot of the pc: no signal again. ...

24. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

Hi, I agree - Diseqc in MCE is a tricky thing. TeVii released a diseqc-solved-driver 2 weeks ago, so I assume TT will release it, too, with their MCE 7 signed drivers. Waiting daily for the release

25. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

...orking with dvblink tvsource and dvbdream at the moment. The settings which worked for me in dvbdream are diseqc 1.0/2.0 first port astra 19,2 port 2 astra 23,5 port 3 and for stay empty. In dvblink t...

26. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

The new ones, too, as it works here. nevertheless we experienced problems with different Diseqc Switches, like Spaun. We have to wait for the new drivers now ... In case it won't solve your prob

27. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

The old drivers bda 4.4.10.X had diseqc support.

28. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

No new drivers yet. Any news?

29. Re:Mystique SaTiX S2 Dual
(Forum/SaTiX-S2 Dual)

...h mit 2 Antennenkabeln betrieben. Weiterhin habe ich die Kabel auch getauscht. Ich betreibe die Karte mit Diseqc. Erst wenn ich im Femon-Plugin mit der Cursertaste rechts zum nächsten Tuner wechsel...

30. Re:S1-1600 BDA driver : Diseqc 4/1 not working
(Forum/TT-Budget S/S2/C/T)

Ok, heard today, that TT releases new drivers for Windows 7 (enhanced Diseqc support). I assume they will be available Monday/Tuesday next week ...