1. Re:full refund please or a replacement
(Forum/SaTiX-S2 Dual)

my motherboards PCI Express frequency tuning is from 100MHz up to 150MHz at 1MHz increments. trying the opposite as i cant decrease it so i increased it to 105mhz made no difference anyway .

2. Re:\"Weak signal\" with Mystique Dual S2 V2
(Forum/SaTiX-S2 Dual)

...n Device 021:20000: Tune success DVBS Tuner 1 Version = 3 Error = 00000000 Frequency = 12.246.000 Multiplyer = 1.000 LNBLow = 9....

3. Re:C1501 + Windows 7 MCE / Mythbuntu
(Forum/TT-Budget S/S2/C/T)

...#Cards_tested_with_MythTV Windows MCE 7 is basically a "bug" for DVB-C cards, as they use a "unique" cablefrequency pool. On top, MCE 7 itself is not supporting payTV. There is another way to in...

4. Re:Satix S2 Dual / Kein Signal
(Forum/SaTiX-S2 Dual)

...NgTun Device 30000: Tune failure DVBS Tuner 1 Version = 3 Error = C0000001 Frequency = 12.441.000 Multiplyer = 1.000 LNBLow = 9....

5. Re:Satix S2 Dual / Kein Signal
(Forum/SaTiX-S2 Dual)

...NgTun Device 30000: Tune failure DVBS Tuner 1 Version = 3 Error = C0000001 Frequency = 12.441.000 Multiplyer = 1.000 LNBLow = 9....

6. Re:Satix S2 Dual / Kein Signal
(Forum/SaTiX-S2 Dual)

...NgTun Device 20000: Tune success DVBS Tuner 1 Version = 3 Error = 00000000 Frequency = 10.877.000 Multiplyer = 1.000 LNBLow = 9....

7. Re:TT Budget 5.0.3.1 Win7 MCE (DVB-S, DVB-C, DVB-T)
(Forum/TT-Budget S/S2/C/T)

...ithin 2 minutes it goes up to 20 packets lost. My analysis has been made on satellite Atlantic Bird 3 (5°W), Frequency 11555 V where the overall data rate is approximately 48 Mbps and the quality 67%....

8. Re:Windows 7 BETA Driver Connect incl. CI f. MCE
(Forum/TT-Connect S/S2/C/T)

...terfaces on NodeType 0 (2 interfaces): [06/09/10 12:21:37 : 125] GetTunerInterfaces: IID_IBDA_FrequencyFilter [06/09/10 12:21:37 : 125] GetTunerInterfaces: IID_IBDA_Sign...

9. TT-viewer - User selected transponder frequencies
(Forum/TT-Connect S/S2/C/T)

...ng fine but I am not able to get access to all cable transponder frequencies. When I try to scan for example frequency 290000KHz the system search for 289500KHz and so do not find the services. In Bel...

10. Re:Windows 7 BETA Driver Connect incl. CI f. MCE
(Forum/TT-Connect S/S2/C/T)

...o use again the DVB-C -> DVB-T mapper, but it's of no real use anymore, as the mapper must be DVB-C -> DVB-C frequency tables. I hope we'll get a beta-release this week. It's not that easy and don'...

11. Re:Problem with C1501 with bad reception (?)
(Forum/TT-Budget S/S2/C/T)

...happened to QAM256 channels and Premium C-2300 cards. The DVB card tries to lock onto a pre-defined or found frequency. If it can lock, it could be, that the frequency is not 100% ok. We had frequency...

12. Re:SaTiX S2 V2 card no singnal
(Forum/SaTiX-S2 Dual)

...NgTun Device 30000: Tune failure DVBS Tuner 1 Version = 3 Error = C0000001 Frequency = 11.953.000 Multiplyer = 1.000 LNBLow = 9....

13. SaTiX S2 V2 card no singnal
(Forum/SaTiX-S2 Dual)

... no image/signal in MCE or PorgDVB. Tried scan with Transedit .... nothing. Also tried direct programming of frequency and channel, nothing. I am sure the LNB is ok because have been using the satalli...

14. Re:C-1500 Windows 7 drivers.
(Forum/TT-Budget S/S2/C/T)

...PAYTV integration into Windows 7 MCE directly! C1500/C1501 will follow a few days later, as they require (frequency)mapping tools for MCE 7 - you know the bug in Microsoft MCE (for DVB-C support). ...

15. Re:C-1500 Windows 7 drivers.
(Forum/TT-Budget S/S2/C/T)

...PAYTV integration into Windows 7 MCE directly! C1500/C1501 will follow a few days later, as they require (frequency)mapping tools for MCE 7 - you know the bug in Microsoft MCE (for DVB-C support). ...

16. [SOLVED]S464 on Linux:No dvr0 output (no picture)
(Forum/S420/S460/S470)

... Television,RTL;RTL World': ERROR: invalid value for parameter 'O' delivery DVB-S, modulation QPSK sat 0, frequency 12187 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35 vpid 0x00a3, apid 0...

17. Re:SaTiX-S2 Dual Card HD-channels SR 30000 problems?
(Forum/SaTiX-S2 Dual)

...nd new transponder, it’s is still 25MS/S. The only difference between the new and the old transponder is the frequency, on Thor 6 it’s in the low band and on Thor 5 it was in the high band??? //Pet...

18. Re:Mystique SaTiX S2 Dual – Disappointing!
(Forum/SaTiX-S2 Dual)

...NgTun Device c0000: Tune failure DVBS Tuner 1 Version = 3 Error = 00000000 Frequency = 11,953,000 Multiplyer = 1,000 LNBLow = 9,...

19. S2-3200 - No channels found on 12070
(Forum/TT-Budget S/S2/C/T)

...I'm having probelms to find all channels (12051 and 12090) It looks like something is interfering on that frequency. I changed already the CPU frequency and tested some other bios settings but s...

20. Re:No results from channel scan
(Forum/TeRiX)

Try to scan a frequency manually, which exists, it should lock onto that channel. The software usually uses predefined frequencies to scan, also check the QAM modulation.

21. Re:New Windows XP drivers? When?
(Forum/SaTiX-S2 Dual)

... certain circumstances, so pretty much depending on the signals received on both tuners, which can vary from frequency to frequency... Can an encrypted channel without any possible decryption cau...

22. Re:Mystique SaTiX S2 Dual
(Forum/SaTiX-S2 Dual)

...NgTun Device 20000: Tune failure DVBS Tuner 1 Version = 3 Error = C0000001 Frequency = 10.744.000 Multiplyer = 1.000 LNBLow = 9....

23. Re:Mystique SaTiX S2 Dual
(Forum/SaTiX-S2 Dual)

...NgTun Device 20000: Tune failure DVBS Tuner 1 Version = 3 Error = C0000001 Frequency = 12.265.000 Multiplyer = 1.000 LNBLow = 10....

24. Re:Mystique SaTiX S2 Dual
(Forum/SaTiX-S2 Dual)

...r Art: 15.01.2010 13:57:50 MSTNgTun Device 50000: Tune failure DVBS Tuner 1 Version = 3 Error = C0000001 Frequency = 11.362.000 Multiplyer = 1.000 LNBLow = 9.750.000 LNBHigh = 10.600.000 LNBSw...

25. Re:TT-Budget s-3200 Linux
(Forum/TT-Budget S/S2/C/T)

...ings are correct, but to confirm I now test with a channels.conf created by me in AtlanticBird-12.5W and the frequency with Symbolrate above 4999 (17455) worked while the other does not. I used mplaye...

26. Re:TT-Budget s-3200 Linux
(Forum/TT-Budget S/S2/C/T)

...at is correct. Already tested on Fedora and Mandriva and the result is the same. I have not tried to enter a frequency with pid Audio and pid Video and correct Symbolrate ...

27. Partial software blindscan on PC with TeVii
(Forum/S420/S460/S470)

...er the whole 45 MS/s: So up to 3 tune requests (or maybe 6, for horizontal and vertical polarization) per frequency, which are executed in few seconds, have to be performed to scan the whole symbol...

28. C-1501 in windows 7 - it works, missing channels
(Forum/TT-Budget S/S2/C/T)

...l areas might be covered by Microsoft's channel database. I can only find channels that happen to exist at a frequency that corresponds to an entry in some other area's mapping. I have tried to fin...

29. Re:C-1501 Budget - DVBC in Windows 7
(Forum/TT-Budget S/S2/C/T)

.... # use '#' for comments at biginning of line # values in one line must seperated by ', ' # # 1. Value Frequency given in kHz # 2. Value Symbolrate given in kSym/s # 3. Value Modulation as QAM...

30. Re:Budget C-1501 - no channels
(Forum/TT-Budget S/S2/C/T)

Don't know the channelsettings, but did you try a manual search in TT-Viewer for a specific frequency? Does it detect the channel? Also make sure, that you really have the LATEST soundcard driver i