1. Re:TT Budget 5.0.3.1 Win7 MCE (DVB-S, DVB-C, DVB-T)
(Forum/TT-Budget S/S2/C/T)

Hi I also still have the same problem. The machine BSOD's a few times a week randomly. Any news on a new release? I also have another issue, where MCE stops decoding. So when I go to a Pay cha

2. Re:Problem mit TechnoTrend Premium C-2300
(Forum/TT-Premium S/S2/C/T)

...S" steht. Was das Starten der Karte anbelangt -> schau mal ins Mainboard BIOS, ob da der PCI Latency Timer auf 32 steht, wenn nicht, stelle ihn auf 32. Das Flachbandkabel mußt Du erstmal nicht v...

3. Re:pixelation gone but now i have a different issue
(Forum/SaTiX-S2 Dual)

...is indeed some sort of issue. Last i talked to him was last week where he said that because of vacation time he could not get back to me before this week at the earliest. I crossing my fingers. ...

4. Re:tevii S464 expresscard faulty ?
(Forum/S420/S460/S470)

... card. Applications (like DVBVIEWER etc.) offer the capability to repeat the DiseqC command for up to 3 times....

5. Re:full refund please or a replacement
(Forum/SaTiX-S2 Dual)

i can honestly say that as a last resort i installed dvbdream and tried one last time with this card. dvbviewer was my no.1 and have been using it for 3yrs now. dvbdream only recongizes one tune

6. full refund please
(Forum/SaTiX-S2 Dual)

...experiences any problems at all. i feel i shouldnt have to deal with this card anymore and it is now time to return it for a full refund under the mystique warranty. if admin would like to expla...

7. Re:\"Weak signal\" with Mystique Dual S2 V2
(Forum/SaTiX-S2 Dual)

... einem anderen Player (z.B. VLC) wieder. Sind die Klötzchen dann immer noch zu sehen? Teste auch mal Timeshift: treten DANN auch noch Klötzchen auf?...

8. Re:Computer won\'t start, with Mystque Cabix
(Forum/CaBiX)

Hi, first time I hear that. Please check the PCI contacts of the DVB-C card AND the CI-connector (80pin) on the card itself. Could there be any short circuit (two pins touching each other)?

9. Re:TT CT3650 CI and MediaPortal
(Forum/TT-Connect S/S2/C/T)

...ickup. I am done waiting for TT to fix this, because I think they are not able to, looking at the long time these issues are outstanding. I am glad that I was in a position to go the Linux route and ...

10. New S2-3650 not working with dish setup
(Forum/TT-Connect S/S2/C/T)

...e purchased an S2-3650 to replace my old S2-3200, because my PC has died and I now use a laptop for the time being. Unfortunately the same setup I used (4/1 diseqc with 42 and 7E) does not work curre...

11. Re:Collection of bugs for used driver >= x.59
(Forum/SaTiX-S2 Dual)

...theless the graphics card and mainboard are running well, only the Satix S2 seems to have problems (sometimes). In my opinion, the timing problems have to be solved in the satix driver. If i look ...

12. Re:pixelation gone but now i have a different issue
(Forum/SaTiX-S2 Dual)

...nyways, the channel named Kanal 5 HD is the one i have the most problems with. Ive emailed the guy 3 times but he has just ignored me so im not getting my hopes up :( regards Jacob...

13. Re:Collection of bugs for used driver >= x.59
(Forum/SaTiX-S2 Dual)

Hi, i have the problem, that the Satix S2 Dual V2 sometimes refuses to tune (with dvbviewer, recording service) after my system resumed from hibernate. The problem is sporadically ~ 1 out of 5 tim

14. Re:faulty CI or CAM
(Forum/SaTiX-S2 Dual)

...Dual Device. I've come a little further now, but diseqc didn't work and CI option was accesable some time, but nothing was displayed and nothing was shown clicking the menu button. After close i...

15. Re:Windows 7 BETA Driver Connect incl. CI f. MCE
(Forum/TT-Connect S/S2/C/T)

Post was deleted ... as it does not contain any message solving this posting ^ hummm.... first time I've been modded :blink:

16. \"Weak signal\" with Mystique Dual S2 V2
(Forum/SaTiX-S2 Dual)

After short time, the MCE gives a "Weak signal" error message. System: intel i3, 4GB, H55 Driver: 1.4.6.59 (as told in the download area, the driver setup gives another version???) I am suf

17. Re:faulty CI or CAM
(Forum/SaTiX-S2 Dual)

...l Mediaguard CAM and Aston 1.07 CAM using the CI module. Using Mediaportal after viewing fine for some time, when switching channel the CAM stops responding and only removing the CAM and inserting ag...

18. Re:Collection of bugs for used driver >= x.59
(Forum/SaTiX-S2 Dual)

...rys to come through.this only happens when using "vista EVR". all this has already been reported. many times . i hope you have success with the developer because there has been none so-far with admi...

19. Re:Collection of bugs for used driver >= x.59
(Forum/SaTiX-S2 Dual)

...rys to come through.this only happens when using "vista EVR". all this has already been reported. many times . i hope you have success with the developer because there has been none so-far with admi...

20. Re:Collection of bugs for used driver >= x.59
(Forum/SaTiX-S2 Dual)

...rys to come through.this only happens when using "vista EVR". all this has already been reported. many times . i hope you have success with the developer because there has been none so-far with admi...

21. Re:Collection of bugs for used driver >= x.59
(Forum/SaTiX-S2 Dual)

...A3 card, but it doesn't seem to work correctly. Using Mediaportal I can watch 2 channels at the same time but usually after some time when trying to switch channel then the cam\ci refuses to decryp...

22. Re:2x CT-3650
(Forum/TT-Connect S/S2/C/T)

...ortal it is possible to with one TT device record or view and record two different channels at the same time. The only limitation is that these channels need to be on the same transponder. For me it i...

23. Re:S2 Dual V2 + CI + Linux
(Forum/SaTiX-S2 Dual)

... developers still work on drivers for Linux to support the CI and we are waiting for it since a certain time. For Windows there is no problem. I just talked to the developer - we were told, that CI...

24. Re:pixelation gone but now i have a different issue
(Forum/SaTiX-S2 Dual)

...you find a good working driver for your setup. Again, im amazed of the poor support. I spend alot of time testing again yesterday and posted about the findings and requestet feedback, but all i get...

25. Re:first time use of subscriptioncard in tuner
(Forum/Media Center Hardware & Software)

If the CAM and smartcard works in another device, too, yes, it will also work with TV Tuners as well.

26. Re:first time use of subscriptioncard in tuner
(Forum/Media Center Hardware & Software)

Its a smartcard that is already paired to a CAM. The card needs to be updated the first time by setting it for 2 hours on a specific tvchannel, it is this procedure that I want to know if works on tun

27. Re:first time use of subscriptioncard in tuner
(Forum/Media Center Hardware & Software)

It depends on the smartcard, you will use. A lot of providers use smartcard-pairing (marrying it to the serial number of the settopbox/receiver, making it impossible to use with other receivers AND/OR

28. C1501 + Windows 7 MCE / Mythbuntu
(Forum/TT-Budget S/S2/C/T)

...VB-C ? And what about Mythbuntu, what do i need to get it working? Thanks if anyone would use the time to tell me what to do ? Brian...

29. Re:pixelation gone but now i have a different issue
(Forum/SaTiX-S2 Dual)

...re (e.g. MCE community), describing similar problems (which are not IN GENERAL for all customers!). Sometimes it really had to do with Cyberlink Codecs V9, sometimes with ATI graphiccards (some of the...

30. first time use of subscriptioncard in tuner
(Forum/Media Center Hardware & Software)

Hi! Most subscription services tell you to put the card in the tuner the first time and let it stay on one channel for a couple of hours so that the subscription card will get updated. How does